Select Page
Inventory4

Bill of Materials Template: What It Is and How to Get Started!

Posted by ThomasLast Updated January 24th, 2023
— 5 minutes reading

Manufacturers deal with a bill of materials template on a daily or weekly basis. But even if you’re not the kind of business that assembles products, you’ll still want to get familiar with the concept. After all, if you do any kind of kits or specially priced bundles, you might use a bill of materials (BOM) to track these as well.

Think of a bill of materials like the ingredients list for a finished product (or finished good): the specific quantity of raw materials that are required to create one finished item. Just like the ingredients list in a good recipe, you’ll want to be very precise with your bills of materials template.

Which items are listed on the BOM? Be as specific as you can about the kind of item here: “Green aluminum frames from Keystone” gives you a lot more information than “Green Frames”, since your store may sell multiple items that match that basic description.

You may not personally need this level of specificity because you know your own products well, but as your business grows you may no longer be the one who actually takes action on your bill of materials, so you’re doing yourself a favour by including the right amount of information up front. You can prevent a lot of confusion and extra training down the line by including enough detail up front.

In the case of Archon Optical’s Zealot sunglasses, the bill of materials would start off like this:

bill of materials for Zealot composed of Lenses, Frames, Nosepads

These sunglasses are pretty simple, but the BOM can be a little more complex than you might think. In the case of Zealot sunglasses with optical corrections for myopia (nearsightedness), then the left lens could be different from the right lens. That’s because different corrective levels in lenses require different cuts and thickness of glass. This means that each lens could be a different item on the BOM, and the BOM for a Zealot (No Correction) would have different components than the BOM for a Zealot (with Myopic Correction).

Specify the ratios or quantities in your BOM

It’s important to list the kind of items that make up your finished good, but their quantity is just as important. Just like “a pinch of salt” can vary greatly depending on who is doing the pinching, you don’t want to leave the ratios in your BOM up for interpretation.

Bill of Materials for 1x Zealot: Lenses 2x each, Frames 1x each, Nosepads 2x each

Try to be specific about the unit of measure (UoM) that you use when you write your BOM by using words like “each”, “cartons”, or “crates”. You’ll also want to standardize those UoM and write out how they relate to one another.

Units of Measure: 10 each equals 1 carton, 100 cartons equals 1 crate

The documentation should answer questions like: how many pieces are in a single carton? How many cartons are in a crate?

Tracking costs through your bill of materials template 

One of the other important functions that a BOM serves is to track cost. It’s easy enough to track cost when you’re just buying parts because you’re only accounting for the initial price and freight, but creating something out of a bunch of different items is another challenge altogether.

Without a good bill of materials template, it can be easy for the actual cost of your component items to get lost in the mix, and this can skew the actual cost of your end product. Since many businesses derive their price from their costs using markup, inaccurate costing could cause you to under-value the finished goods you create.

Bill of materials for 1x Zealot ($18): Lenses 2x each ($10), Frames 1x each ($6), nosepads 2x each ($2)

When you’re putting a BOM together, make sure to track the specific costs of the items. It might also be a good idea to add a date to the BOM, since the costs of your products can change over time.

Using BOMs for kits

As discussed earlier, even if you’re not in manufacturing, you might still create BOMs for special kits or promotional bundles. By listing all of the item details as if you were going to manufacture the finished kit, you can be sure you’ll have the right items and the right quantities present. A good BOM will also help you decide how much the final kit actually costs.

Multi-tier bill of materials

What we haven’t discussed yet is where you should keep and update the BOMs for your products. Excel or Word are easy places to keep BOMs if they’re simple and relatively straightforward.

In fact, we have a template for single-level BOMs to help you get started.

However, once you start dealing with assembling items out of other assembled items (sub-assemblies), things can be a little harder to track.

As an example, let’s talk about Archon Optical’s Zealot shades with some myopic correction. We assumed that those lenses earlier were just supplied to Archon Optical, but what if the company had to manufacture them as well? In that scenario, the BOM is suddenly multi-tiered and you have one assembly (Zealot) relying on another sub-assembly (the lenses).

Bill of materials for 1x Zealot ($18): Lenses 2x each ($10), start sub assembly curved glass 2x each ($8), reflective coating 2x each ($2) end subassembly, Frames 1x each ($6), nosepads 2x each ($2)

inFlow puts the BOM right in your product list

Handling a BOM on a dedicated document or spreadsheet can work. However, we think the faster way is to build the BOM right in with your inventory. In fact, inFlow Cloud has a built-in bill of materials template for products and also help you track your products. 

This makes it very easy to select any product and see if it is built out of any components. You can then view the order history for that product to see when it was last built, and how many pieces were made.

If you’d like to streamline your BOM and product workflow, start your free inFlow Cloud trial today.

Try inFlow Cloud free

No credit card required. Sign up now!